Wood-Look Panels Designed for Outdoor Walls
Outdoor Wood Panels Without Natural Timber Maintenance
The wood-look surface brings the warmth and visual grain associated with timber to exterior walls without requiring regular staining, sealing, or refinishing. High-density polymer and high-strength composite form the core of the system, creating a waterproof and pest-proof exterior surface suited to changing outdoor conditions.
Use the panels to add vertical texture to exterior feature walls, entrances, patio areas, façades, and other architectural surfaces. The slatted profile creates consistent shadow lines across the wall, while finishes ranging from lighter Ash and Honey Oak to Ipe, Deep Walnut, and Black Charcoal make it easier to coordinate the installation with brick, stone, concrete, metal, and surrounding exterior finishes.
Unlike Andor Willow's interior wood veneer panels, these products are specifically designed for exterior exposure. That distinction matters when selecting material for walls exposed to rain, moisture, temperature changes, and direct outdoor conditions.
Composite Slat Panels with Tongue-and-Groove Installation
The composite slat panels connect side by side through a tongue-and-groove system, helping create consistent spacing and a continuous slatted appearance across larger surfaces. Each box contains two pieces that fit together to provide approximately 15.75 inches of effective installed width.
Two height options are available at approximately 94.5 inches and 106.3 inches, allowing the panel length to be matched more closely to the dimensions of the wall. Panels can be cut as required during installation, and the system is designed to be installed using basic tools.
Matching composite fascia boards and L-corner trim are available for areas where the edge of the panel system remains visible. These accessories help finish outside corners and exposed ends without introducing a different material alongside the main wall treatment.
Shop similar collections: Outdoor Wood Composite Siding | Water-Resistant Paneling | Decorative Wall Panels | Wood Paneling | Shop All Wall Panels
Five Wood-Look Finishes for Exterior Slat Walls
We offer this exterior panel system in Ash, Honey Oak, Ipe, Deep Walnut, and Black Charcoal. The range makes it possible to move from lighter timber-inspired tones to deeper architectural finishes while keeping the same exterior composite construction.
The panels are waterproof and pest-proof and have been tested for demanding outdoor conditions. They require no ongoing wood maintenance, making them a practical option when the appearance of a slatted timber wall is wanted without maintaining exposed natural wood.
Matching fascia boards and corner trim are available alongside the main panels, and samples can be ordered before selecting a finish for a larger installation. Most orders ship within one to three business days, with free shipping available on qualifying exterior panel orders.
Outdoor Wood Panels FAQ
Are outdoor wood panels made from real wood?
These exterior panels are not made from natural timber. They use high-density polymer and high-strength composite with a wood-look surface designed to provide the appearance of timber while performing in exterior conditions.
Are these exterior panels waterproof?
Yes. The composite panels are waterproof and pest-proof and are designed for outdoor exposure and changing weather conditions.
What sizes are available?
The exterior slat panels are available in approximately 94.5-inch and 106.3-inch heights. Each installed panel section provides approximately 15.75 inches of effective width.
Can I order samples before choosing a finish?
Yes. Samples are available so you can compare Ash, Honey Oak, Ipe, Deep Walnut, and Black Charcoal before ordering full-size panels.
Don't just take our word for it
from 498 reviews
We are a general contractor and just finished a project using the wide willow oak panels. The project turned out incredible. The product is very nice and well made. I'm glad we found this product and company. We will definitely be using their products going forward on other projects.
It was my first project using Andor willow panels and it came out great! Took me two days total - one for building a frame around existing hood and gluing panels, and second for painting. Very easy to work with and looks beautiful!
We had a good experience with receiving and installing the product. Some of the edges of the veneer were (very) slightly damaged, but in my opinion, not enough to warrant a refund/replacement. With the help of a laser level, the install was quick and easy. I've added some photos. I've recommended the product to several friends already.
We installed this last year around October. We are very satisfied with the results. Our walls were longer so we added some modifications. Very good quality product.
I couldn’t be happier with these paintable ribbed wall panels! They were some of the most reasonably priced options I found online, and the quality exceeded my expectations. I hired a handyman to handle the installation, and after touching up the seams and the top of the wall with a little light caulking, the finished result was absolutely flawless.
The panels took paint beautifully, and the transformation they brought to my room is incredible. This feature wall has completely elevated the look of my space, and every time I walk into my house, I feel so excited and proud to see it!
The product is AWESOME! Nothing negative to say. We are still in the process of installing so I can add a “finished” photo then. But we love it!
We absolutely LOVE our wood slat room divider! Our living space is an awkward size, and this divider was the perfect addition to give the room dimension and a stylish touch while keeping everything feeling open and airy. It truly transforms the space and adds a lot of character. Guests always mention the slats when they see them for the first time.
The installation was straightforward if you're even a little handy, though we'd definitely recommend using a laser plumb bob to ensure everything lines up perfectly. It made the process much easier and more precise for us.
Also, the customer service was top notch. When we received the package, we had a small amount of missing hardware which was promptly taken care of for free.
Overall, a great product, and will definitely come back if we need to add more design details to our house.
This room divider has been an amesome addition to our living space. The high-quality wood and exceptional craftsmanship make it an eye-catching aesthetic centerpiece, elevating the entire room with its warm, modern appeal. Beyond its visual charm, it’s incredibly functional—providing just the right amount of privacy without making the space feel closed off. The durability is outstanding. It’s a perfect blend of style, functionality, and quality—highly recommend for anyone looking to enhance their home!
Relatively easy to cut and install. Getting the seams just right on corners was a challenge and hard to line up perfectly but overall the result is beautiful!
Excellent product. The install was exactly as described. And the product looks excellent in my space. Will serve well as a subtle room divider and privacy screen for occasional overnight guests.
Excellent customer service before and during the ordering and installation. Highly recommend.
Living room looks amazing
Love the panels- highly recomend
I specified a slatted design for a client water closet within the new bath. I ordered the two samples to review the wood and settled on the white oak. It perfectly matches the vanities I had built for the client. The product quality is fab. It was significantly less than custom building with my vanity woodworker. Client is thrilled. I’ll be using again on other projects.
Love the finished look!
We absolutely love our new wide willow panels. They look amazing!
The installation is straight forward, and delivery met our expectations.
The tall white oak wood with black felt panels worked great! They transformed and updated our living area. They even helped with the noise
level in the room. Installation was easy, we chose the glue method on the back of the felt panels. Very easy to install. We have had a lot of compliments.
Trusted by Businesses, Big and Small
Planning made easy
Refundable Samples
Whether you're a designer, a DIYer, or anywhere in between - samples are always the best way to start your project.